Solenoid Assy includes one Skinner 3 way solenoid;  (12 Volt, 6 watt, 3/64 orifice) Added to it are a custom aluminum nut with stainless debris screen and lock wire holes, stainless pipe nipple and mini sure seal connector on 8” leads.  The solenoids are rated to 150 psi and will relieve if overpressurized

Shifter Harness includes mini sure seal connectors on 8 feet of 18 gage stranded and tinned hookup wire with pvc insulation (UL 1007, 300V, -20 to 105 deg C)  3 wire hookup, red-12V feed, brown-down, white-up.

Clutch Harness same as shift harness with single plug and blue and red wires

Actuator Assy includes 2 solenoid assy’s, one harness, one Bimba 3/4 dia, 2 inch stroke double acting stainless cylinder, and one 1/4 female rod end with stainless jam nut . The entire assembly with harness weighs 22 ounces, center to center dimension is 7.25” when retracted.  Pivot mounting hole is 1/4” diam.

Prices

Solenoid Assy........................................$78.00
Replacement Shifter Harness..............$25.00
Clutch Harness......................................$20.00
Actuator Assembly...............................$197.00
 

davecook@paradigmmotorsports.com

[Paradigm Motorsports] [Transport Wheels] [Air Shifter] [Steering Wheel] [New Paddles] [Actuator] [Control Box] [Tanks] [Regulators] [Notes] [Data] [Torsen Splines] [Spec Miata] [Torsen Housing] [Photogallery]